image

main banner

pvc rollsPVC - ROLLS, STRIPS, SHEETS

Flexible PVC is used in DMF doors (Strip doors, Swingflex doors, Rapid Auto Roll doors). Often, these doors need replacement PVC. This replacement PVC can be ordered, cut to suit your exact requirement OR full rolls of flexible PVC can be ordered, as per size list, below.

POLYSKIN PVC is available in a variety of colours. Please see the colour chart. Please contact us for details on available thicknesses (which vary from 1mm to 1.5mm), widths and roll sizes. Polyskin is used for Rapid Auto Roll Doors and Swingflex Doors.

HACCP Australia LogoSome datasheets available on flexible PVC are:

  • Sound Insulation Characteristics;
  • PVC Weight;
  • Generally available sizes;
  • Colour Chart for Polyskin PVC;
  • Combustion Characteristics - details available on request;
  • Specification Strip Type NT Standard - details available on request;
  • Specification Sheet Type LT - detials available on request;
  • Specification Welding Bronze - details available on request;
  • Chemical Resistance Table - details available on request;

PVC ROLL SIZES

Width(mm) x
Thickness(mm) x
Roll Length(mtrs)^
FINISH** GRADE
NT = Normal Temp Grade
LT = Freezer Temp Grade
WG = Weld Grade
100 x 2 x 50 Clear NT, LT
150 x 3 x 75 Clear NT, LT
150 x 5 x 50 Clear NT, LT
200 x 2 x 50 Double Ribbed - Clear NT
200 x 2 x 100 Clear, Red, Yellow, Orange NT, LT (clear only)
200 x 3 x 75* Clear, Yellow NT, LT (clear only)
200 x 4 x 50* Clear NT
300 x 2 x 50 Bronze - Welding Grade WG
300 x 2 x 75 Weld Green (almost black) NT
300 x 3 x 50 Double Ribbed - Clear NT
300 x 3 x 75 Clear, Orange NT, LT (clear only)
300 x 5 x 50 Clear NT, LT
400 x 4 x 50 Clear NT
900 x 1.2 x 20* Clear NT
900 x 5 x 20 Clear NT, LT
900 x 7 x 20 Clear NT
1000 x 7 x 20 Clear NT, LT
1220 x 2 x 20 Clear NT
1200 x 3 x 20 Clear NT
1200 x 5 x 20 Clear NT, LT
1200 x 7 x 20 Clear NT, LT
1200 x 10 x 20 Clear NT
1370 x 0.3 x 50*** Clear Ultra Voilet Resistant
1370 x 0.5 x 50*** Clear Ultra Voilet Resistant
1370 x 0.75 x 30*** Clear Ultra Voilet Resistant
1370 x 1 x 25*** Clear Ultra Voilet Resistant
1500 x 2 x 20 Clear NT
1500 x 5 x 20 Clear NT, LT
1500 x 7 x 20 Clear NT, LT
1500 x 10 x 20 Clear NT
2000 x 10 x 20 Clear NT
2200 x 5 x 20 Clear NT
2200 x 7 x 20 Clear NT
Various Sizes Various Colours POLYSKIN
^ Special Sizes can be ordered, for bulk requirements;
* Only available on special orders;
** Above PVC is not anti static, however. Anti Static can be specially ordered;
*** These can only be ordered as MINIMUM OF ONE ROLL.

arrow imageBack to top



pvc rolls imageSound Insulation Characteristics

Flexible PVC used in Swingflex and Strip Doors (of composition K 3016/35) offers good Sound Reduction Characteristics because of its special composition.

Medium Sound Transmission Characteristics Rm > 35dB (at as low as 5mm thickness).

Other properties are:

  • Glass like transparency;
  • Very good mechanical characteristics (see Specification sheets above);
  • High flexibility;
  • Smooth surface (excellent for hygiene/clean room areas and wet areas);
  • High resistance to weathering and to chemicals (see Chemical Resistance table above);

These characteristics permit use in fields that are in part not accessible to products made of other materials. The sound transmission level attainable under conditions of use is subject to, on the one hand, the type of building, for example, room size, noise absorption rate in the room, and frequency range, and on the other hand, the method by which the PVC door material has been fitted.

In doing this, the best way of working with the material is to let it hang freely and, if possible, not stretch it too tight.

Every noise reduction measure is only as good as its weakest point component, therefore the following rule-of-thumb should be noted: 10% (where non-insulated) of the opening reduces the insulation by 50%.

arrow imageBack to top



PVC Weight*

PVC Thickness:: PVC Weight
2mm:: 2.5 kgs per mtr square
3mm:: 3.8 kgs per mtr square
4mm:: 5.0 kgs per mtr square
5mm:: 6.2 kgs per mtr square
7mm:: 8.7 kgs per mtr square
10mm:: 12.4 kgs per mtr square

* Note that these are approximate weights only

arrow imageBack to top



Polyskin Colour Chart*

Cherry Red Orange Yellow
Emerald Green Olive Black
Light Blue Royal Blue Blue Brown
 
White

* NOTE that these colours are only an approximate representation of the available colours and meant for the benefit of our clients. These colours may appear in different hue, saturation, tint and shade depending on the viewers' computer screen and its resolution, operating system and version used, internet browser and its settings, etc.

arrow imageBack to top

Copyright © 2008 All Right Reserved DMF International Pty Ltd

Website Design by Webkom